Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Therma-Tru Construction in Boulder Creek, CA | Millwright Builders
We provide independent Therma-Tru repair in Ben Lomond, Boulder Creek, and the surrounding Santa Cruz Mountains. The difference here comes down to one thing: we know how Therma-Tru doors actually perform on redwood-shaded, sloped, fire-hardened lots, not just how they look in a catalog. If you need a Fiber-Classic entry door set on a pier-supported home or a Profusion slab swapped on a Chapter 7A rebuild, call us at (866) 925-0334.
Why Boulder Creek Residents Choose Us for Therma-Tru Service
Noel Castañeda founded Millwright Builders after nearly two decades of residential and light commercial work across the Peninsula, and our Therma-Tru experience comes from jobs most flatland contractors never see. We’ve installed and serviced Fiber-Classic, Smooth-Star, and Profusion doors on mountain cabins, post-fire rebuilds, and mid-century homes throughout Boulder Creek and Therma-Tru repair in Lompico. We’re independent, which means we’re not tied to any manufacturer’s sales script. We source OEM Therma-Tru sills, sweeps, strikes, and glass cassettes when they’re available and match the unit, and we use quality aftermarket hardware when OEM lead times would strand a mountain job. Every product we install, we’ve vetted, not just stocked.
Our Therma-Tru sales & service work covers the full door system, from slab to frame to sidelite glass. For Boulder Creek homeowners, that matters because a door that leaks at the sill on a redwood-shaded lot is a moisture problem that spreads into the subfloor and rim joist. We address the whole opening, not just the panel.
Styles & brands we work with
Common Therma-Tru Construction Problems We Solve in Boulder Creek
- Moss and mildew staining on Fiber-Classic bottom rails. North-facing elevations under redwood canopy stay damp for months. Soil splashback and duff keep the lower rail wet, and fiberglass develops black mildew staining that most cleaning products won’t lift permanently. We strip, prep, and reseal the slab and adjust the sill height to get the door out of the splash zone.
- Rust bleed on Profusion steel slabs. Older mountain cabins don’t have the roof overhangs newer homes do. Winter rain driven off the eave line and deck splashback sits on bare steel edges at the kickplate and hinge. We see bubbling and rust bleed within a few seasons. We repair the edge where the steel is sound and replace the slab when the corrosion has compromised the stile.
- Latch strike drift on sloped, pier-supported homes. Boulder Creek builds sit on piers, stem walls, or cut-and-fill pads. Foundation movement and slope settle shift the rough opening slightly over time, so the latch strike drifts, weatherstrip crushes, and the door leaks at the sill even when the slab itself is fine. We realign the frame, replace the weatherstrip, and reset the threshold to match the settled plane.
- Chapter 7A re-inspection failures on rebuild doors. Post-CZU rebuilds in the 95006 burn scar carry wildfire-resistant construction requirements. A Therma-Tru door that passed a pre-2020 permit often has standard sidelites or old vents that don’t meet current Chapter 7A glazing and ignition-resistance standards. We flag and replace those units before re-inspection, not after.
- Warped or delaminated fiberglass slabs from moisture and sun cycling. Redwood shade and winter damp on one side, summer heat on the other. Fiberglass expands and contracts, and a slab that wasn’t properly painted or sealed will warp at the stile or delaminate at the edges within a few years. We repair when the frame and glass are sound and replace when the slab can’t hold a weather seal.
Therma-Tru Service in Boulder Creek: What Local Conditions Mean for Your Equipment
Nearly every rebuild in the CZU Lightning Complex burn scar is subject to Chapter 7A wildfire-resistant construction rules. That’s a specific Santa Cruz County requirement tied to fire history, not a generic California code item. A Therma-Tru entry or patio door that was completely compliant on a pre-2020 permit can fail re-inspection today for lack of ignition-resistant glazing, tight-weave weather stripping, or self-closing hardware. We’ve seen it repeatedly on rebuilds off Bear Creek Road and throughout the 95006 corridor, including Therma-Tru in Felton. Boulder Creek’s narrow one-lane mountain roads compound the problem: a door unit delivery has to be scheduled around a single lane-closure window, not a curb-drop window. That means we coordinate slab, frame, and glass arrival together, and we don’t leave a rough opening exposed on a mountain lot while the right sidelite is still in a warehouse in Indiana. When you work with us, the delivery schedule, the Chapter 7A compliance check, and the install crew are all one conversation. Your renovation shouldn’t require you to become a project manager.
Therma-Tru Models & Products We Service in Boulder Creek
We install and repair the full Therma-Tru residential line. Fiber-Classic fiberglass entry doors, Smooth-Star fiberglass slabs and interior doors, Profusion steel entry doors, and Therma-Tru door glass and sidelite systems, including internal-grid and privacy glass configurations. Our parts approach is straightforward: we use OEM Therma-Tru replacement sills, sweeps, strikes, and glass cassettes when they’re available and match the unit. When OEM lead times would hold up a Boulder Creek job for weeks, we install quality aftermarket hinges, deadbolts, and weatherstrip that meet or exceed the original spec. We repair before we replace when the slab, frame, and glass are sound. But on a fire-hardened rebuild or a door with cracked steel, delaminated fiberglass, or a warped stile in this climate, replacement is usually the honest answer. We’ll tell you which one applies to your door and why.
See the difference
Before
After
Before
After
Before
AfterTherma-Tru Service Pricing in Boulder Creek
Door work in Boulder Creek is priced by the opening, not by the hour. Here are the ranges we typically see on mountain lots here, based on our South San Francisco market calibration:
| Service | Typical Range |
|---|---|
| Bathroom Remodel | $9,000 – $28,000 |
| Walk-In Shower Installation | $4,500 – $12,000 |
| Small Bathroom Remodel | $5,000 – $12,000 |
| Window Replacement | $4,500 – $15,000 |
What drives cost on a Therma-Tru door job here: slab condition, whether the frame needs resetting, whether Chapter 7A compliance requires new glazing or self-closing hardware, and whether delivery has to navigate a one-lane road window. A free estimate means we look at the opening, the existing unit, and the site access before we give you a number. Call (866) 925-0334 to schedule one.
Serving Boulder Creek, CA — Our Local Coverage Area
We’re our General Contractor in Boulder Creek and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Therma-Tru Construction in Boulder Creek
Yes, if your home is in the CZU Lightning Complex burn scar and was rebuilt under a Chapter 7A permit, your entry and patio doors need ignition-resistant glazing, tight-weave weather stripping, and self-closing hardware. A door that passed inspection on an older permit may not meet current requirements. We check your existing unit against the current code before you spend money. Call (866) 925-0334 for an assessment.
Redwood shade keeps the lower panel damp for months in Boulder Creek, and soil splashback plus duff wick moisture into the bottom rail. North-facing elevations are the worst. We can strip, treat, and reseal the slab and raise or reset the sill to break the splash contact. If the rail has already softened, replacement is the better call. Call (866) 925-0334 and we’ll tell you which path fits your door.
Yes, and we see it regularly. Profusion steel slabs on older cabins get rust bleed and bubbling at the kickplate and hinge edge where winter rain off the eaves and deck splashback sits on bare steel. We repair the edge when the steel is sound and replace the slab when corrosion has reached the stile. Call (866) 925-0334 for an inspection.
Foundation movement and slope settle shift the rough opening over time, so the latch strike drifts, weatherstrip gaskets crush, and the door leaks at the sill even when the slab itself is fine. We realign the frame, reset the threshold, and replace the weatherstrip to match the settled plane. It’s a repair, not a door replacement, in most cases. Call (866) 925-0334 and we’ll confirm what your opening needs.
We do it regularly. We schedule the delivery around a lane-closure window so the slab, frame, and glass arrive together, and we don’t leave a rough opening exposed on a mountain lot while one component is still in transit. The delivery is part of the project schedule, not an afterthought. Call (866) 925-0334 to discuss your site access.
Service Areas Near Boulder Creek
We serve the full 95006 corridor plus the surrounding mountain and Peninsula communities. Our Boulder Creek service area includes Boulder Creek proper and the fire-scar rebuild zones. We also run Therma-Tru service in Seven Trees, Therma-Tru service in Brookdale, and the neighboring communities of South San Francisco, San Bruno, Brisbane, Colma, Millbrae, and Visitacion Valley.
Book Your Therma-Tru Service in Boulder Creek Today
If your Therma-Tru door is leaking, failing a Chapter 7A re-inspection, or just showing its age in the redwood damp, call us. We’ll inspect the opening, walk you through repair versus replacement, and give you a written estimate. Reach Noel Castañeda and the Millwright Builders crew at (866) 925-0334. Build it right the first time, the Peninsula weather will find out if you didn’t.
Written by Noel Castañeda, Owner at Millwright Builders, serving Boulder Creek and the Santa Cruz Mountains.