Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Therma-Tru Construction in Lompico, CA | Millwright Builders
We provide independent Lompico General Contractor service for Therma-Tru across Lompico, and we are not an authorized Therma-Tru dealer. What makes our work here different is that we plan every door replacement around Lompico’s one-lane delivery roads and settling hillside framing before the first slab is ever ordered. If your Therma-Tru entry door is binding, leaking, or delaminating, call (866) 925-0334 for a straight assessment.
Our crew has installed and serviced Therma-Tru door systems throughout the Santa Cruz Mountains long enough to know how Fiber-Classic and Smooth-Star slabs actually perform under wind-driven rain, redwood duff, and out-of-plumb cabin framing. We’re field repair and replacement people first. See our Therma-Tru sales & service page for the full scope of what we handle.
Why Lompico Residents Choose Us for Therma-Tru Service
Therma-Tru doors are not a side line for us. Noel Castañeda, owner of Millwright Builders, spent the better part of two decades doing residential work across the Peninsula before founding this company, and he’s carried that habit of checking structure before finishes into every door job we take in Lompico. We know the difference between a slab that failed and a jamb that settled, which matters when half the doors in this ZIP are hung in redwood frames that haven’t been square since the Carter administration.
We stock genuine Therma-Tru sweeps, weatherstrip, sills, and hinges locally, so a simple seal replacement on Lompico Road doesn’t turn into a two-week parts wait. When a slab is beyond saving, we quote replacement honestly and explain why. No sugarcoating, no upsell into a new frame unless the framing demands it.
Styles & brands we work with
Common Therma-Tru Construction Problems We Solve in Lompico
- Water-logged bottom rails and delaminating edges. Lompico’s winter rain drives sideways against entry faces on exposed hillside lots. When the factory sweep degrades, water wicks up into the fiberglass at the bottom rail and hinge stile. You’ll see swelling, flaking, and a door that sticks at the bottom corner by February.
- Slabs binding in out-of-plumb jambs. Older cabin-era homes in Lompico settle. A Therma-Tru door that was hung square thirty years ago is often now fighting a frame that moved a quarter inch on its piers. The slab is fine. The opening isn’t. We fix the opening, not the door.
- Multi-point and adjustable sill hardware seizing. Grit, moisture, and slope-driven drainage running past the threshold work their way into the sill mechanism. After a few wet winters, the lock points stop throwing and the sill won’t adjust. We clean, lubricate, or replace with OEM parts.
- Faded, chalking fiberglass faces on sun-facing decks. Lompico gets real UV exposure on south and west entries. Dark-stained Fiber-Classic doors fade unevenly, and the factory finish under sidelites blisters where moisture wicks behind trim that was never properly flashed on a wood-frame opening.
- Lock and strike alignment failures on settled redwood framing. The deadbolt won’t throw, the strike plate is a quarter inch off, and everyone assumes the door warped. Usually the jamb sank. We re-square the rough opening, reset the strike, and the existing slab works fine.
Therma-Tru Service in Lompico: What Local Conditions Mean for Your Equipment
Here’s the thing about Lompico that no generic door contractor from over the hill understands. Lompico Road and West Lompico Road narrow to a single lane in stretches. A full Therma-Tru entry system delivery isn’t like dropping a package on a porch in Sunnyvale. The truck has to be staged. Traffic flagging has to be coordinated. If the door doesn’t fit the opening we measured, that truck is now stuck on a grade with nowhere to turn around, and you’re paying for a second delivery. So we confirm door dimensions and swing before the order ships, not after it’s sitting on a flatbed halfway up the hill. That single habit saves Lompico owners more money and time than any premium door feature ever will.
Then there’s the framing reality. Many Lompico homes are redwood or wood-frame builds from the mid-20th century, some with unpermitted additions and decks on piers. The rough openings are rarely standard. A Therma-Tru slab that fits perfectly in a new tract home will bind in a Lompico cabin unless someone re-squares the jamb first. We do that work. It’s not glamorous. It’s what makes the door actually close.
Therma-Tru Models & Products We Service in Lompico
We service the full residential Therma-Tru lines commonly installed across the Santa Cruz Mountains. That includes Fiber-Classic entry systems, Smooth-Star fiberglass doors, the Classic-Craft series, and builder-grade Benchmark doors. Our parts approach is simple: where the slab and frame are still sound, we use genuine Therma-Tru sweeps, weatherstrip, sills, and hinges. Fit tolerances on these systems are tight, and aftermarket seals often leak within a season. When a slab is delaminated or a jamb is rotted into the framing, we tell you straight that replacement beats patching, and we quote both paths so you can decide with real numbers.
See the difference
Before
After
Before
After
Before
AfterTherma-Tru Service Pricing in Lompico
Therma-Tru door work in Lompico spans a wide range because the access and framing conditions vary so much from lot to lot, unlike flatter areas where Therma-Tru in Brookdale might see more standard installs. A simple sweep and weatherstrip replacement runs on the lower end. A full entry system replacement with jamb re-squaring, threshold flashing, and a one-lane delivery staged with flagging lands higher. Here’s how our related window and structural work prices out in this market:
| Service | Price Range |
|---|---|
| Window Replacement | $4,500 – $15,000 |
| Impact Window Installation | $8,000 – $25,000 |
| Home Addition | $45,000 – $130,000 |
Every estimate includes a written line-item breakdown, so you know what the access coordination costs versus the materials. No allowances that balloon later. Call (866) 925-0334 to schedule a free estimate, and we’ll walk the site before we quote anything.
Serving Lompico, CA — Our Local Coverage Area
We’re based in the Lompico area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Therma-Tru Construction in Lompico
Usually not. In Lompico, the door slab is often fine while the jamb has settled on its piers or the rough opening was never square to begin with. We check the frame first. If the jamb is sound and the slab hasn’t delaminated, we re-square the opening, reset the strike, and the door works. Call (866) 925-0334 for an assessment before you buy a new door you may not need.
Yes, but it takes planning. The truck has to be staged at the widest pullout, the drive flagged if it’s a one-lane stretch, and the door hand-carried or carted the last stretch on steep private drives. We schedule this before the order ships, not after the truck is committed. That’s standard for how we work in Lompico.
Water is getting past a failed sweep or weatherstrip and wicking up into the fiberglass at the bottom rail. On Lompico’s exposed hillside entries, wind-driven rain accelerates this. Once the slab delaminates, replacement is the honest fix. If caught early, a genuine Therma-Tru sweep and sill replacement stops the damage.
No door is fireproof, but a properly installed Therma-Tru fiberglass or steel entry with an intact seal and ember-resistant threshold flashing holds up better than a warped wood door with gaps. We install to the opening’s actual geometry, so there are no gaps for embers to find. Wildfire hardening on Lompico lots is about the whole envelope, and the entry is part of that, just as it is for Therma-Tru in Mount Hermon homes facing similar exposures.
We replace whichever part actually failed. If the slab is delaminated but the jamb is solid and square, we hang a new Therma-Tru slab in the existing frame. If the jamb is rotted or the opening has shifted, we replace the frame and flash it against slope runoff properly. We quote both paths so you’re not paying for framing you don’t need. Call (866) 925-0334 for an exact quote.
Service Areas Near Lompico
We serve Lompico and the surrounding mountain and bayside communities, including Therma-Tru service in Ben Lomond, Therma-Tru service in Bonny Doon, Felton, Boulder Creek, and the South San Francisco Peninsula. If you’re in the 95005 ZIP or just off Highway 17, we’ll come take a look. Our full Lompico service area page covers the details.
Book Your Therma-Tru Service in Lompico Today
If your Therma-Tru door is sticking, leaking, or delaminating, don’t wait for the next storm to finish the job. Call (866) 925-0334 for a free estimate. We’ll assess the door, the jamb, and the access route before we quote a single number. Build it right the first time. The Lompico weather will find out if you didn’t.
Written by Noel Castañeda, Owner at Millwright Builders, serving Lompico and the Santa Cruz Mountains.