Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
KraftMaid Construction in Belvedere, CA | Millwright Builders
We provide independent KraftMaid cabinet installation, refacing, and full kitchen construction across Belvedere, CA 94920, alongside our General Contractor in Belvedere services. The one thing that makes our KraftMaid work here different: we understand that nearly every job on this built-out island means matching new cabinet boxes to 1950s and 60s wall framing that was never plumb, square, or level. If you’re planning a KraftMaid install or reface in Belvedere, call (866) 925-0334 for a free estimate. We’re Millwright Builders, and we’ve worked KraftMaid cabinetry into more Belvedere Island and Lagoon-side kitchens than we can count.
Why Belvedere Residents Choose Us for KraftMaid Service
KraftMaid builds a cabinet box that rewards careful installation and punishes shortcuts. That’s true anywhere, but in Belvedere the stakes are higher. Salt air off Richardson Bay, wet winters on steep clay, and houses that have settled for sixty years all change how KraftMaid cabinets behave in the field. Noel Castañeda, owner at Millwright Builders, grew up watching the industrial corridor along the bay in South San Francisco and learned early that good structures don’t happen by accident. That’s the standard we bring to Belvedere: we specify the box construction and hardware that will hold up in your specific exposure, and we install it to the material’s standard, not just to code.
We’re an independent builder, not a KraftMaid dealer. That matters because we have no incentive to push a replacement when your existing KraftMaid run can be repaired. For KraftMaid sales & service, you get honest repair-vs-replace guidance from a crew that has rehung, releveled, and rebuilt KraftMaid cabinetry across the island.
Styles & brands we work with
Common KraftMaid Construction Problems We Solve in Belvedere
These are the KraftMaid failure modes we see most often in Belvedere homes. Each one connects to something specific about this island’s climate, housing stock, or geography.
- Swollen MDF door faces on bay-facing runs. Fog-driven moisture off Richardson Bay wicks into MDF-core KraftMaid doors on sheltered exposures, causing the bottom edge to swell and delaminate. We see this most on Lagoon and west-facing Belvedere kitchens where the cabinet run sits against an exterior wall that stays cool and damp through the summer fog season.
- Softened particleboard boxes on Lagoon-piling homes. Houses on Belvedere Lagoon sit on pilings, and moisture rises from below. KraftMaid particleboard or MDF cabinet boxes wick that moisture at the toe kick and sink base, softening the material after a wet winter. We’ve replaced more than one Vantage sink base that felt solid from the outside and crumbled behind the face frame.
- Racked wall cabinets on out-of-plumb mid-century walls. Belvedere’s post-war and mid-century homes rarely have square framing. Cabinet installers who force KraftMaid wall cabinets against an out-of-plumb wall end up with doors that won’t close, hinges that bind, and soft-close dampers that pop prematurely.
- Worn hinge plates and drawer glides from 1990s-era installs. Original KraftMaid glide and hinge hardware wears out after two or three decades. In Belvedere kitchens where the original installer shimmed the boxes hard to level, the wear is uneven. Doors stop aligning, drawers rack, and the cabinet feels tired even though the box is sound.
- Toe kicks and bases drawing moisture from bad hillside drainage. Homes on Belvedere’s steep clay slopes deal with runoff against the exterior side of the cabinet run, which translates to stubbornly damp toe kicks and swollen base material even when the deck above is flashed correctly.
KraftMaid Service in Belvedere: What Local Conditions Mean for Your Equipment
Belvedere is effectively built out. There’s virtually no new ground-up construction on the island, which means every KraftMaid job we do here is a cabinet swap, reface, or full kitchen remodel inside an existing mid-century or post-war shell. That sounds straightforward until you’re setting a new KraftMaid Vantage all-plywood box against a wall that hasn’t been plumb since Eisenhower was in office. We don’t fight the framing; we shim, scribe, and level the run so the doors hang true and the drawers travel on their glides without binding, even when the house itself is an inch out of line over eight feet. On Lagoon-front houses along Beach Road and the Belvedere Lagoon shoreline, we also coordinate deck and foundation work around the City of Belvedere’s floodplain rules and tide gate operations. Contractors offering KraftMaid service in Tiburon rarely deal with this level of water-adjacent permitting. We do.
KraftMaid Models & Products We Service in Belvedere
We install, reface, and repair the KraftMaid lines you’ll actually find in Belvedere kitchens: Vantage, the all-plywood box line that’s our default recommendation for Lagoon-side and hillside homes; Momentum, with its framed and frameless door styles; Deluxe full-access cabinetry, where soft-close hardware and tight reveals need precise installation to work right; and Prelude and Moments series door styles that older Belvedere kitchens wear. When the box is sound, we source genuine KraftMaid replacement doors, drawer fronts, hinges, and glides. When a factory part is discontinued, we use quality aftermarket full-extension slides and soft-close hinges that meet or exceed the original spec. We don’t reface over rot. If a Lagoon-side or hillside KraftMaid run has a swollen MDF box or a water-damaged toe kick, we quote honest repair-vs-replace and let you decide with real numbers in front of you.
See the difference
Before
After
Before
After
Before
AfterKraftMaid Service Pricing in Belvedere
Pricing for KraftMaid work in Belvedere follows the same ranges we use across South San Francisco and the Peninsula. What drives the cost here is site access and substrate condition: narrow lanes, steep lots, and mid-century framing that needs more shimming and scribing than newer construction. Here are the line items for the KraftMaid construction services we handle most:
| Service | Price Range |
|---|---|
| Kitchen Remodel | $14,000 – $45,000 |
| Cabinet Installation | $4,000 – $13,000 |
| Kitchen Island Installation | $3,000 – $10,000 |
| Countertop Installation | $2,000 – $6,500 |
| Backsplash Installation | $800 – $2,500 |
Every free estimate includes a written, line-item quote so you can see exactly what’s in the number. We don’t do change orders that surprise you halfway through. Call (866) 925-0334 to schedule yours.
Serving Belvedere, CA — Our Local Coverage Area
We’re based in the Belvedere area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – KraftMaid Construction in Belvedere
Yes, if the boxes are sound. We reface KraftMaid cabinet runs all over Belvedere’s hillside lots, swapping doors, drawer fronts, and hardware while keeping the existing boxes. If the MDF or particleboard has softened from moisture or the box has racked out of square, refacing over it would be throwing good money after bad, and we’ll tell you that plainly before we quote anything.
Bay-facing walls in Belvedere stay cooler and damper because of fog and salt air off Richardson Bay. That moisture wicks into MDF-core KraftMaid door faces and swells the bottom edge, especially on runs against exterior walls without adequate insulation or air sealing. The fix often starts with the doors, but the durable solution addresses the moisture path behind the cabinet run. Call (866) 925-0334 and we’ll assess what’s actually driving the swelling.
Yes. The City of Belvedere’s floodplain rules apply to Lagoon-front properties, and cabinet work that’s part of a broader remodel often triggers review coordinated with tide gate operations. We’ve worked with the city’s process enough that it doesn’t slow us down. A contractor from KraftMaid service in Sausalito or Tiburon who hasn’t pulled a Belvedere Lagoon permit may not know which questions to ask first.
We shim the boxes at the studs, scribe the end panels to the wall, and set the run on sleepers where the floor has sagged or settled. The key with KraftMaid Vantage and Momentum lines is getting the box itself in plane before you hang doors and drawers. If the box is racked, the doors will never align. We build the run to the cabinet’s standard, then set it against your wall.
Usually, yes. KraftMaid has kept many of its door styles in production far longer than competitors, and where the original is discontinued, our supplier network can often match the profile, wood species, and finish closely enough that the replacement reads as original. The caveat is finish aging: a door that’s been baking in Belvedere sun for 25 years won’t match a new factory finish perfectly, and we’ll show you samples before you commit. Call (866) 925-0334 for a match assessment.
Service Areas Near Belvedere
We run KraftMaid service through Belvedere and into the surrounding Peninsula communities. For KraftMaid work just across the Richmond – San Rafael Bridge, see KraftMaid service in Marin City. South of the city, our crews handle KraftMaid service in Woodside and the mid-Peninsula hills. We also serve Belvedere service area neighbors in Tiburon, Sausalito, and Mill Valley.
Book Your KraftMaid Service in Belvedere Today
If you’re planning KraftMaid cabinet work in Belvedere, let’s walk the job together. We’ll quote it honestly, install it right, and stand behind the workmanship. Call (866) 925-0334 to schedule your free estimate.
Written by Noel Castañeda, Owner at Millwright Builders, serving Belvedere and the greater Peninsula.