Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why South San Francisco Homeowners Choose KraftMaid Construction
Millwright Builders provides independent KraftMaid construction, installation, refacing, and repair service throughout South San Francisco, from the flatlands near Grand Avenue up to the slope lots below the Sign Hill sign. We’re not a KraftMaid dealer or authorized agent – we’re a licensed general contractor who has installed and refaced KraftMaid cabinetry across San Mateo County for years, and we know which boxes hold up in Peninsula homes and which doors fail first. Our KraftMaid work is built to the material’s standard, not just to code. Call (866) 925-0334 for a free estimate on cabinet installation, refacing, or a full kitchen remodel.
Why Trust Millwright Builders for Your KraftMaid Construction?
KraftMaid makes a dozen-plus cabinet lines across several price tiers, and they don’t fail the same way. A Vantage all-plywood box wears differently than an Expressions thermofoil door. We know the difference because we’ve pulled both apart. Noel Castañeda, our owner, grew up in the Sunshine Gardens neighborhood of South San Francisco and trained at Skyline College in San Bruno before spending nearly two decades doing residential and light commercial work across the Peninsula. He’s built a reputation in South San Francisco for finishes that hold up to fog-belt moisture and framing that doesn’t rack. “Build it right the first time – the Peninsula weather will find out if you didn’t.” Our team works with KraftMaid Vantage, Canvas, Expressions, and Prelude lines regularly, so we can diagnose a hinge failure, a sagging drawer bottom, or a delaminating door in one visit and tell you honestly whether to repair, reface, or replace.
Styles & brands we work with
Common KraftMaid Construction Problems We Fix in South San Francisco
- Thermofoil and laminate door delamination on KraftMaid Expressions and entry-level Canvas lines. The vinyl layer peels away from the MDF substrate, usually near the dishwasher, sink base, or any cabinet within range of steam. Once moisture gets behind the thermofoil, the bond fails and no glue will bring it back. We replace delaminated doors rather than chase a cosmetic fix that peels again in a year.
- Particleboard-box drawer bottoms sagging under heavy loads. Lower-tier KraftMaid boxes use engineered wood drawer bottoms in a dado groove. Cast-iron pans, stoneware, and stacked dinner plates eventually bow the bottom so it no longer seats in the groove. We replace the drawer box with plywood where the cabinet box is sound, or rework the drawer with a thicker bottom and full-extension glides.
- Soft-close hinges and drawer glides loosening or stripping out. KraftMaid’s soft-close hardware is decent out of the box, but the screws bite into the box material. After years of daily use, the screw holes wallow out and the hinge or glide starts to sag. We repair stripped hinge mortises and remount glides with proper fasteners, or upgrade to a quality aftermarket soft-close glide that matches the door’s drilling pattern.
- Painted and glazed finishes checking, yellowing, or wearing at high-touch edges. Kitchen cabinets in South San Francisco deal with more than hand oils – the marine layer brings moisture into the kitchen for a good chunk of the year. KraftMaid’s painted and glazed finishes on Canvas and Prelude doors can check or wear thin around drawer pulls, corner cabinets, and upper doors near the range. We order touch-up finish kits through KraftMaid’s finish program where the box is still good.
- Framed box face joints opening up in damp, coastal kitchens. The Peninsula’s fog belt is real, and South San Francisco sits right in it. Homes near the Grand Avenue corridor or up on Sign Hill see enough ambient moisture that wood movement is a fact of life. We regularly see face-frame joints on older KraftMaid boxes opening slightly during wet winters, then closing up again in summer. When the box is structurally sound, we refit and re-secure; when the box has racked, we tell you plainly.
KraftMaid Parts & Our Repair-vs-Replace Approach
We source genuine KraftMaid hinges, drawer glides, and touch-up finish kits when the box is structurally sound and the door has life left in it. KraftMaid’s OEM hardware is built for their drilling patterns, so a genuine hinge drops into the same bore and aligns without shimming. When a door has already delaminated, we tell you straight: replace the fronts, don’t chase a glue fix that will fail again. For a solid Vantage all-plywood box, refacing with new doors, drawer fronts, and soft-close hardware is usually the smartest money. Every product we install, we’ve vetted – not just stocked. If you’re weighing options, call (866) 925-0334 and we’ll give you honest numbers on both paths before you spend a dime.
Our KraftMaid Service Process – Step by Step
- 1
Diagnosis. We inspect the cabinet boxes, door hinges, drawer glides, and finish condition. We verify which KraftMaid line you have – Vantage, Canvas, Expressions, Prelude, or a discontinued series – because the repair path depends on what the box is actually made of.
- 2
Recommendation. We give you a written line-item recommendation: reface versus replace, the parts we’ll source, and what gets upgraded versus what stays. No change orders, no vague allowances.
- 3
Repair or install. We install genuine KraftMaid hardware where the box is sound, set new doors and drawer fronts to factory tolerances, and handle countertop templating and installation in the same project if quartz or granite is part of the plan.
- 4
Function check. Every door, drawer, and glide gets cycled. We check reveal gaps, soft-close action, and alignment against a level and square – not just by eye.
- 5
Warranty walkthrough. We document what was installed and what the material warranty covers versus our workmanship coverage, then walk you through the completed scope before we call the job done.
See the difference
Before
After
Before
After
Before
AfterKraftMaid Products We Service & Install in South San Francisco
We service and install KraftMaid Vantage (all-plywood, full-overlay semi-custom), Canvas (framed, paint-heavy traditional), Expressions (entry semi-custom laminate and thermofoil), and Prelude (translucent-finish full-overlay) lines. We also work with discontinued KraftMaid series where parts are still available through our supplier network. We stock common soft-close hinges, drawer glides, and touch-up finish kits locally for fast turnarounds on repairs, and we order model-specific doors and drawer fronts direct when a reface is the right call.
We Also Service These Brands
Millwright Builders works across 50+ vetted brands, so we’re not tied to one cabinet maker. That matters when you’re pairing a KraftMaid reface with a Cambria or Silestone quartz top, Kohler fixtures, and Toto plumbing – one contractor, one conversation, no coordination tax.
KraftMaid Construction Service Pricing in South San Francisco
| Service | Typical Range |
|---|---|
| Cabinet Installation | $4,720 – $15,340 |
| Full Kitchen Remodeling | $16,520 – $53,100 |
| Small Kitchen Remodel | $10,620 – $23,600 |
| Countertop Installation | $2,360 – $7,670 |
| Backsplash Installation | $945 – $2,950 |
| Kitchen Island Installation | $3,540 – $11,800 |
FAQs – KraftMaid Construction Service in South San Francisco
Yes, if the cabinet boxes are sound – that’s exactly what refacing is. We remove the delaminated doors and drawer fronts, keep the plywood or sound particleboard boxes, and set new fronts with fresh hardware. But the delaminated thermofoil doors themselves are not worth a cosmetic fix. Once the vinyl layer separates from the MDF, moisture has already done the damage, and no adhesive holds long-term. The smart path is new doors over a good box. Call (866) 925-0334 and we’ll inspect yours and give you a straight answer.
It depends on the line. KraftMaid Vantage and Prelude with painted or translucent finishes tend to hold up better in South San Francisco’s fog belt than entry Expressions thermofoil doors, which delaminate faster when they’re near heat and steam. If you’re choosing new cabinets for a home in the flatlands or up on Sign Hill, we recommend all-plywood or solid wood doors over thermofoil, especially around the dishwasher and sink base. We specify the brand, explain the trade-off, and stand behind the install.
Possibly, but more often it’s a mounting issue, not a manufacturing defect. KraftMaid’s soft-close hardware is generally reliable; what fails over time is the screw hole in the cabinet box material that holds the glide. When the hole strips, the glide drops, the drawer binds, and the soft-close action goes with it. We repair stripped holes, remount glides, and upgrade to full-extension soft-close where the original was a lighter-duty spec. Whether the original manufacturer warranty applies depends on the series and its age – we can check that during a service visit.
Yes, in most cases. KraftMaid keeps finish records for their lines, and we can order doors, drawer fronts, or additional boxes to match a current finish. The match is close, but not always perfect on older installations because the existing finish has aged, yellowed slightly, or worn at the touch points. In a South San Francisco kitchen near a range or a window that gets marine air, you’ll see the difference more than in a dry interior wall. We’ll show you the finish sample against your existing doors before we order anything. Call (866) 925-0334 to set up a finish match.
Yes, and this is where our general contractor scope actually saves you coordination. We’ll install the KraftMaid cabinet boxes, template the countertop, and set the Cambria, Silestone, or Caesarstone run over the existing boxes – one contract, one schedule, one accountable company. From the roofline to the back patio – one contractor, one conversation. Your renovation shouldn’t require you to become a project manager.
Cabinet installation in Daly City and South San Francisco typically runs $4,720 to $15,340, while a full kitchen remodel with KraftMaid cabinetry, countertops, and finish work lands between $16,520 and $53,100 depending on the line, box construction, finish, and scope. A reface of sound KraftMaid boxes costs less than new full boxes because the boxes stay put. For an exact line-item quote on your project, call (866) 925-0334 – estimates are free.
Book Your KraftMaid Service in South San Francisco, CA
From the flatlands to Sign Hill, we handle KraftMaid installation, refacing, and full kitchen remodels across Brisbane and South San Francisco with one license, one team, and one point of accountability. Call (866) 925-0334 to schedule your free estimate with Millwright Builders.
Written by Noel Castañeda, Owner at Millwright Builders, serving South San Francisco and the Peninsula since founding the company.