Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
KraftMaid Construction in Felton, CA | Millwright Builders
We provide independent KraftMaid cabinet installation, refacing, and repair across Felton, CA, including the narrow mountain roads and steep lots that define life in the San Lorenzo Valley. Our KraftMaid work here differs from anywhere else because we plan every delivery, every cabinet box, and every mounting decision around fire-hardening codes, pier-and-post foundations, and driveways that a standard delivery truck simply cannot climb. Call (866) 925-0334 for a free estimate.
As independent cabinet specialists, we know the KraftMaid lineup inside-out, from the framed KraftMaid sales & service Vantage and Delorean lines to the full-access Kendall and Harlow series, because we install, reface, and repair them across the Santa Cruz Mountains, not because KraftMaid endorses us. Our credibility comes from hundreds of Felton-area kitchen and bath projects where we’ve had to make KraftMaid boxes work with the realities of fire-hardening and slope-side construction.
Why Felton Residents Choose Us for KraftMaid Service
Felton is not Scotts Valley. The lots are steeper, the roads are tighter, and the fire code applies to every cabinet you put against an exterior wall. Noel Castañeda, our owner, came up through the Peninsula’s construction trades and brought that same single-contractor discipline here: one call for the cabinetry, the countertops, the subfloor, and the seismic retrofit underneath them. That matters when a Vantage cabinet is sitting on a subfloor that’s been wicking moisture for fifty years.
We specify the brand, explain the trade-off, and stand behind the install. For Felton Home Remodeling with KraftMaid, that means OEM hinges and glides whenever they’re available, aftermarket soft-close hardware when OEM is backordered, and a straight answer when the right call is replacement instead of repair.
Styles & brands we work with
Common KraftMaid Construction Problems We Solve in Felton
- Door warping and finish cracking on Vantage oak. Older Felton cabins were rarely built with vapor barriers, and many still heat with wood stoves. The seasonal swing from wet winter air to stove-dried winter air pulls moisture out of oak doors unevenly. We straighten what can be straightened and reface what can’t, always checking the cabinet box before assuming the door is the whole problem.
- Soft-close drawer glides failing on pier-and-post foundations. Felton’s winter rains make the ground move, and a pier-and-post foundation moves with it. That racks the cabinet boxes, which loads the glides unevenly and kills the soft-close mechanism within a season or two. We reinforce the box, re-shim the cabinet, and install glides with stainless fasteners.
- Face-frame joints separating on Delorean cherry. Wildfire smoke and ash are not just a roof problem. Ash is alkaline and pulls moisture from exposed wood at the joints, stressing the glue lines on cherry face frames. We see this on Delorean cabinets in homes that have experienced multiple smoke events without a full interior clean afterward.
- Painted finishes blistering on Kendall full-access doors near sinks. Tight mid-century Felton kitchens rarely have the ventilation a modern dishwasher and sink demand. Trapped moisture blisters painted Kendall doors where the finish meets steam. We address the cabinet and the ventilation, because fixing one without the other guarantees a callback.
- Water-damaged particleboard boxes under sinks. This is every cabinet brand’s weak point, but in Felton it shows up faster because winter humidity lingers longer under redwood cover. We’re direct about this: a swollen particleboard box is a replacement job, not a glue-and-clamp repair. Patching particleboard rarely survives another wet season on a Felton slope.
KraftMaid Service in Felton: What Local Conditions Mean for Your Equipment
Felton’s narrow, winding mountain driveways often can’t accommodate a standard cabinet delivery truck, so we pre-stage KraftMaid orders at a Scotts Valley warehouse and shuttle them up in smaller vans. That’s a logistical quirk that adds a day but avoids the damage and delays of a failed delivery attempt on roads like Zayante or Lockwood. It’s also the kind of thing a cabinetry page written for a flat-lot city never has to think about, which is exactly why we plan for it on every Felton job. A cabinet that arrives on a full-size truck that can’t make the turnaround at the top of your driveway becomes a cabinet that sits outside in the rain, and that is a warranty problem before installation even starts.
This is one Felton reality that does not apply in Scotts Valley, KraftMaid service in Ben Lomond, or even most of Mount Hermon. We’ve learned it by doing, and we build our delivery schedule around it from the first phone call.
KraftMaid Models & Products We Service in Felton
We install, reface, and repair the full KraftMaid lineup: Vantage (framed, oak and maple), Delorean (framed, cherry and maple), Kendall (full-access, painted), and Harlow (full-access, stained). For parts, we use OEM KraftMaid hinges, glides, and touch-up kits whenever available to preserve fit and finish. When OEM parts are backordered, we substitute high-quality aftermarket soft-close hardware rather than making you wait through a supply-chain delay, and we tell you exactly what we’re doing and why.
For water-damaged or structurally compromised KraftMaid boxes, we recommend replacement over repair. That recommendation is based on what actually survives a wet season on a Felton slope, not on what’s cheapest on the day of the estimate.
See the difference
Before
After
Before
After
Before
AfterKraftMaid Service Pricing in Felton
| Service | Price Range |
|---|---|
| Cabinet Installation | $4,000 – $13,000 |
| Full Kitchen Remodeling | $14,000 – $45,000 |
| Small Kitchen Remodel | $9,000 – $20,000 |
| Kitchen Island Installation | $3,000 – $10,000 |
What drives the number in Felton is usually the foundation, not the cabinet. A pier-and-post kitchen that needs subfloor work, structural shimming, and fire-code detailing will land higher than a slab kitchen in a newer build. We write line-item quotes, not round numbers, and our free estimate tells you exactly where the money goes. Call (866) 925-0334 and we’ll come look at the actual conditions, not a photo.
Serving Felton, CA — Our Local Coverage Area
We’re a Felton General Contractor and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – KraftMaid Construction in Felton
Yes, but we’ll be honest about the color. Vantage oak from fifteen years ago has aged, and a fresh KraftMaid box will not match the patina exactly. We order the closest current finish and then blend with tinted topcoat on-site so the new cabinets read as part of the original kitchen rather than a patch. Call (866) 925-0334 and we’ll bring finish samples to your home.
We start with the subfloor, not the cabinet. We shim and anchor the cabinet bases to a level, reinforced subfloor, then install the cabinets as connected runs rather than independent boxes so they move together. That distributes the racking force across the whole wall instead of concentrating it on one glide or one face-frame joint.
KraftMaid cabinets are not rated as ignition-resistant construction. What matters for Felton’s WUI requirements is the building envelope behind them: the exterior wall assembly, vents, and soffits. We coordinate cabinet installation with the fire-hardening details already required on your permit, so the kitchen upgrade doesn’t undermine your home’s compliance.
We pre-stage the order at a Scotts Valley warehouse and shuttle it up in smaller vans that can make the turn. It adds a day to the schedule but avoids a failed delivery and a pallet of cabinets sitting on the shoulder of Zayante Road. This is standard practice for us on Felton jobs, not an exception.
If the glide failed because of a shifting foundation, replacing only the glide will fail again. We reinforce the box and re-shim the cabinet first, then install the new hardware. If the box itself is swollen or racked beyond tolerance, the glide is not the problem, and we’ll tell you so before quoting a repair. Call (866) 925-0334 to book a free assessment.
Service Areas Near Felton
We serve Felton service area and the surrounding Santa Cruz Mountains communities, including KraftMaid service in Mount Hermon, KraftMaid service in Scotts Valley, Ben Lomond, and Boulder Creek. Many of our Felton jobs begin because a neighbor in Mount Hermon or Scotts Valley recommended us after their own KraftMaid renovation.
Book Your KraftMaid Service in Felton Today
If your Felton home has KraftMaid cabinets that need installation, refacing, or repair, we’ll send someone who knows the product line and the local road. Call (866) 925-0334 to schedule your free estimate. From the roofline to the back patio, one contractor, one conversation. Build it right the first time, the Peninsula weather will find out if you didn’t.
Written by Noel Castañeda, Owner at Millwright Builders, serving Felton and the San Lorenzo Valley.