Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
KraftMaid Construction in Colma, CA | Millwright Builders
We provide independent KraftMaid cabinet installation, refacing, and repair throughout Colma, and the one thing that makes our work here different is scheduling around the town’s memorial parks. When 73% of the land is cemetery, a kitchen tear-out can’t just start whenever the dumpster arrives. Call (866) 925-0334 for a free estimate on KraftMaid work in Colma.
Why Colma Residents Choose Us for KraftMaid Service
We’ve installed and serviced KraftMaid cabinetry across the Peninsula long enough to know its door styles, box construction, and finish behavior by sight. We work on it as an independent shop, no manufacturer affiliation required to get the install right. When a KraftMaid drawer glides rough or a painted door finish blooms, we diagnose the actual cause instead of selling a whole new kitchen.
KraftMaid sales & service is something we approach with a specific eye: knowing which model lines hold up in fog-belt moisture and which ones need extra attention at the seams. Noel Castañeda, our owner, trained at Skyline College in San Bruno and spent the better part of two decades doing residential work across this stretch of the Peninsula before founding Millwright Builders. He grew up just up the road in Sunshine Gardens, so the Colma fog isn’t a surprise to us, it’s a design input. Build it right the first time, the Peninsula weather will find out if you didn’t.
We use OEM KraftMaid hinges, glides, and touch-up finish products where they’re still available. We match aftermarket dovetail drawer boxes, soft-close glides, and door faces only when the OEM part is discontinued or the box is sound but the face is failing. That’s the honest repair-versus-replace conversation most Colma homeowners want before anyone picks up a pry bar.
Styles & brands we work with
Common KraftMaid Construction Problems We Solve in Colma
- Thermofoil peeling on Momentum doors. The damp fog that sits over Colma keeps interior humidity high, and moisture wicks into the seams around the sink and under-window base cabinets. KraftMaid Momentum doors, which use thermofoil and painted MDF faces, lift and blister at the edges faster here than they would three miles inland. We re-bond where the substrate is intact and reface where it’s not.
- Finish checking on framed doors. Older Delite and Vantage installs with painted or stained finishes develop cracks along stiles and rails when south-facing windows bake the face and fog-driven moisture swings stress the wood. In Colma’s post-1950s single-story stucco homes, south-facing kitchen windows are common, so we see this pattern regularly.
- Swollen particleboard boxes at the toe kick. Many original Colma installs went in without a vapor barrier against the slab. The particleboard-box KraftMaid cabinets absorb ground moisture, soften, and mushroom around the dishwasher opening. We’ve pulled more than a few runs where the toe kick crumbled in our hands.
- Drawer glides and hinges loosening after seismic retrofits. Colma sits on the same seismic zone as the rest of the Peninsula. When a home gets retrofitted, the kitchen framing shifts slightly, and lightly shimmed cabinet runs twist. Drawers start sagging, hinges lose alignment. We re-level and re-shim the entire run, not just the one drawer that’s sticking.
- Pantry and base-cabinet runs that were never re-leveled. Colma’s small lots mean kitchens are compact, and original installs often cut corners on leveling to save time. After a decade or two of settlement, the run is out of plane and doors don’t close square. We reset the run on new shims and it works like a new install.
KraftMaid Service in Colma: What Local Conditions Mean for Your Equipment
The thing about Colma that shapes every job here is that 73% of its land is dedicated to burial grounds. No other city in the US has that ratio of cemetery land to living residents. What that means for KraftMaid owners is practical: our kitchen tear-outs get sequenced around active interment services at the neighboring memorial parks. We schedule demolition and loading so no dumpster idles near a funeral procession, no saw runs during a graveside service, and no truck blocks access to the cemetery grounds. That pressure also pushes more Colma owners toward refacing and selective cabinet replacement over a full gut remodel, because a shorter, quieter job is easier to coordinate near the grounds. If you live off Mission Street near Cypress Lawn or Holy Cross, you already know the rhythm of it. We work around it.
KraftMaid Models & Products We Service in Colma
We work across the KraftMaid lines most common in Colma and the wider Peninsula. KraftMaid Vantage, with its all-plywood box and framed or full-overlay door styles, is the workhorse of higher-end Colma kitchens. KraftMaid Momentum is the thermofoil and painted MDF line we most often see failing at the edges. KraftMaid Delite, the framed oak and maple line, shows up in older Peninsula homes and responds well to refacing. We also service KraftMaid pantry and base-cabinet lines with dovetail drawer boxes and full-extension glides. We keep a rolling stock of common KraftMaid hardware and touch-up products on hand for faster Colma turnaround, and we order OEM parts directly when the run warrants it.
See the difference
Before
After
Before
After
Before
AfterKraftMaid Service Pricing in Colma
Pricing depends on whether you’re refacing, selectively replacing, or doing a full remodel. Here’s what we see in Colma and KraftMaid service in South San Francisco:
| Service | Typical Range |
|---|---|
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Backsplash Installation | $800 – $2,500 |
| Kitchen Island Installation | $3,000 – $10,000 |
| Small Kitchen Remodel | $9,000 – $20,000 |
| Kitchen Remodel | $14,000 – $45,000 |
What drives the cost is the condition of the existing boxes, whether the slab has a vapor barrier, and how much finish work the doors need. A free estimate includes a written line-item quote with no change orders once we agree on scope. Call (866) 925-0334 to schedule yours.
Serving Colma, CA — Our Local Coverage Area
We’re based in the Colma area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – KraftMaid Construction in Colma
Yes, in most cases the doors can be re-laminated or refaced if the substrate is still sound. The peeling typically starts at the sink base and under-window cabinets where Colma’s fog keeps humidity high. We’ll tell you honestly if re-bonding will hold or if refacing the whole run makes more sense. Call (866) 925-0334 and we’ll look at the doors in person.
They can. If the original install went in without a vapor barrier against the slab, the particleboard boxes absorb ground moisture and swell at the toe kick. Then a seismic retrofit shifts the framing slightly, and the run twists. We reset the run on new shims, replace any swollen boxes, and re-level everything against the slab.
Yes, we do it regularly. On a small single-story stucco home off Mission Street near the cemetery corridor in KraftMaid in Pacifica and surrounding areas, we pulled a run of original KraftMaid Vantage base cabinets that had swollen at the toe kick and were mushrooming around the dishwasher opening. We replaced the damaged boxes with matching KraftMaid cabinets, reset the run on a new vapor barrier, re-leveled and re-shimmed everything against the slab, and refaced the sound uppers, finishing in three days with hand-carry staging so nothing ran past the neighboring memorial park during services.
Refacing replaces the doors, drawer fronts, and veneers but keeps the existing boxes. Replacement pulls the entire box and installs new. Refacing makes sense when the boxes are square and dry. Replacement makes sense when the boxes have swollen, twisted, or the run was never leveled properly. For Colma homes near the cemeteries, refacing also means a shorter, quieter job.
We sequence demolition and loading around the service schedule at the neighboring grounds. No dumpster idles, no saw runs, and no truck blocks access during a procession. We coordinate with cemetery maintenance crews when excavation runs near the property line, and we hand-dig where interment infrastructure might be close. Call (866) 925-0334 to talk through your specific street and schedule.
Service Areas Near Colma
We serve Colma and the surrounding Peninsula communities, including South San Francisco, San Bruno, Brisbane, Millbrae, and Visitacion Valley. If you’re searching for KraftMaid service in Millbrae or KraftMaid service in Visitacion Valley, the same crew covers those areas. For everything else, check our full Colma service area page.
Book Your KraftMaid Service in Colma Today
Call (866) 925-0334 to schedule your free KraftMaid estimate in Colma. We’ll walk the kitchen, check the boxes, and give you a written line-item quote before any work starts.
Written by Noel Castañeda, Owner at Millwright Builders, serving Colma and the Peninsula.