Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Construction in Colma, CA | Millwright Builders
We’re Millwright Builders, a licensed general contractor providing independent CGI cabinetry, quartz, and finish installation across Colma. The short version: we specify, install, and repair CGI products the way they need to be handled in a fog-belt town where 73% of the land is cemetery and nearly every home sits on a small lot with moisture coming at it from the outside wall. If you’re planning a CGI kitchen or bath in the 94015, call (866) 925-0334 and we’ll walk you through what actually holds up here. We’re not a CGI dealer, and we’re not authorized by the manufacturer. That matters more than you’d think.
Why Colma Residents Choose Us for CGI Service
CGI cabinetry is a real product line, not a mystery. Their RTA shaker and slab boxes, prefinished plywood cases, and quartz surface programs show up in kitchens and baths all over the Peninsula. We’ve built enough of them to know the difference between a line that lands right on the wall and one that’s fighting the framing behind it. Noel Castañeda, our owner, came up through the trades at Skyline College in San Bruno and spent two decades framing and finishing homes across the fog belt — from CGI in Daly City to Colma — before founding Millwright Builders. When a CGI cabinet run goes out of level on a settled Colma slab, we don’t blame the hardware. We check the floor, the wall, and the vapor drive before we touch a hinge. That’s the difference between a repair that lasts and one that’s back in six months.
Because we’re independent, we specify the parts and finishes that fit the job. We are not tied to a dealer program or a quarterly sales target. If a genuine CGI glide is backordered and a known aftermarket maker has a better part on the shelf, we’ll tell you which we’re using and why. Every product we install, we’ve vetted, not just stocked. And we’ve done it in enough Colma homes to know what this town’s fog does to a cabinet box that’s tight to an exterior wall.
Styles & brands we work with
Common CGI Construction Problems We Solve in Colma
- Fog-belt moisture swelling at the toe kick. Colma sits in the fog belt just south of San Francisco, with cool, damp summers that keep exterior surfaces wet for weeks at a time. When a CGI RTA or prefinished cabinet box is installed tight to a fog-side exterior wall, the particleboard or MDF core wicks that damp air and swells at the bottom rail and toe kick. We see it on original 1950s stucco homes throughout the 94015 core. The fix starts with a vapor break behind the run, not just new boxes.
- Quartz seam shadowing at the cooktop cutout. CGI quartz surfaces set over a fast-framed island or vanity without a flat, deflection-checked substrate develop visible seam shadowing and hairline cracks. The cool, damp Colma air doesn’t cause this directly, but it makes any substrate movement more visible because the stone stays cold and stresses transfer at the seams. We check the deflection before we set the slab.
- Cabinet racking on settling slabs. The single-story stucco homes in Colma’s tiny residential core sit on shallow footings that move seasonally. When the slab shifts, CGI cabinet runs go out of level, doors rack, and hinges and drawer glides fail. It looks like a hardware defect. It’s usually a floor problem. We shim, level, and re-hang before we replace anything.
- Finish lifting on prefinished doors. Prefinished CGI door faces and end panels exposed to persistent wet exterior air blister or lift at the edges when the room isn’t pressure-balanced and the wall assembly lacks a proper vapor strategy. Colma’s wind-driven fog finds every gap. A cabinet door that looks like it failed often turns out to be an air-sealing problem behind the wall.
- Vanity failure in compact damp bathrooms. Small Colma bathrooms with no mechanical ventilation stay cool and damp year-round. CGI vanities in those rooms absorb moisture through the back panel and start to swell or delaminate. We usually find the exhaust fan is undersized or venting into the attic. The cabinet is a symptom, not the cause.
CGI Service in Colma: What Local Conditions Mean for Your Equipment
Colma is a town of cemeteries and memory, and that shapes construction here in ways no other city has to deal with. Roughly 73% of Colma’s land is dedicated to burial grounds, which means the living housing stock is squeezed into a tiny residential core of original post-1950s single-story stucco homes on small lots. In nearly every one of those homes, a wall shared with the fog-exposed exterior is within a few feet of the kitchen cabinet run. That’s not a construction detail. That’s a layout decision. When we set CGI cabinets in Colma, the moisture strategy isn’t an afterthought we staple on at the end. We plan the vapor break, the air gap, and the ventilation path before the first box comes out of the carton. And when a job requires trenching or foundation work near cemetery borders, we coordinate with cemetery operators and maintenance crews. Excavation near those grounds often hits old interment infrastructure or decorative stonework, which means hand-digging and dust-controlled, noise-restricted work. A CGI kitchen remodel in Colma sometimes moves slower than the same job in Millbrae, and that’s because the ground here deserves more care than a backhoe gives it.
CGI Models & Products We Service in Colma
We work across the CGI product range that shows up in Colma homes. That includes the Ready-to-Assemble shaker and slab cabinet lines common in spec and rental-grade kitchen refreshes, the prefinished plywood cabinet boxes and dovetail drawer systems found in mid-range remodels, and the CGI quartz and natural stone surface programs that get paired with their cabinetry for countertop and island packages. We also handle CGI vanity and bath cabinetry lines, which fit the compact single-story bathroom remodels we see throughout the 94015. For parts, we source genuine CGI cabinet hardware, hinges, glides, and touch-up finishes when they’re the right fit. When the OEM part is backordered or has a known wear issue, we’ll substitute a quality aftermarket glide or hinge from a known maker and tell you exactly which one and why. Our honest stance: CGI boxes and doors that are structurally sound get re-hung and re-finished. A swollen, water-damaged core or a failed box in a fog-exposed wall gets replaced, not patched. That’s how we handle CGI sales & service across the Peninsula, and it’s how we handle it here.
See the difference
Before
After
Before
After
Before
AfterCGI Service Pricing in Colma
Here’s what CGI work typically costs in Colma. These are the ranges we quote, and they reflect the fog-belt prep, slab leveling, and coordination this town requires.
| Service | Typical Range |
|---|---|
| Kitchen Remodel | $14,000 – $45,000 |
| Small Kitchen Remodel | $9,000 – $20,000 |
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Kitchen Island Installation | $3,000 – $10,000 |
| Bathroom Remodel | $9,000 – $28,000 |
| Bathroom Vanity Installation | $800 – $3,000 |
| Walk-In Shower Installation | $4,500 – $12,000 |
What drives the cost in Colma specifically: whether the cabinet run sits against a fog-side wall and needs a vapor break, whether the slab has settled enough to require shimming and leveling before the boxes go in, and whether any trenching near cemetery borders means hand-digging and coordination with maintenance crews. A free estimate from us includes a site walk, a look at the wall assembly behind the cabinets, and a written line-item quote. Call (866) 925-0334 to schedule one. We’ll tell you what’s real and what isn’t.
Serving Colma, CA — Our Local Coverage Area
We’re based in the Colma area and know this community well. Use the map below to see our service coverage — if you’re nearby, from CGI service in South San Francisco up through Pacifica, we can almost certainly help.
FAQs – CGI Construction in Colma
In most Colma homes, it’s a Colma problem. The cabinet is sitting against a fog-side exterior wall, and damp air is wicking through the back panel into the particleboard or MDF core. The toe kick swells first because it’s closest to the floor. The fix is a vapor break behind the run and often a ventilation upgrade, not just new boxes. Call (866) 925-0334 and we’ll look at the wall assembly before we quote anything.
Yes, but only if we level and shim the run first. The original single-story Colma homes move seasonally, and cabinets set on an unlevel slab will rack the doors and wear out hinges within a year or two. We check the floor, plane or shim the base, and then set the cabinets. The install holds because the substrate is right. If you want a quote for your foundation’s actual flatness, call us.
The short version: check the substrate before the stone goes down. A quartz island set over a fast-framed or unshimmed base will telegraph movement at the seams and hairline-crack at the cooktop cutout, especially when the stone stays cold in Colma’s damp air. We deflection-check the framing, flatten the substrate, and set the slab with proper support. Call (866) 925-0334 and we’ll measure your island before you buy the stone.
Only if the room gets real ventilation. A small bathroom with no exhaust fan or a fan that vents into the attic will keep the vanity’s back panel damp year-round, and the cabinet will swell or delaminate eventually. We usually recommend a properly vented fan and a vapor barrier behind the vanity before we install. The vanity itself can last decades if the room is set up right.
Often, yes. Colma’s cemetery grounds are so densely packed that excavation near the borders frequently hits old interment infrastructure or decorative stonework. We hand-dig in those zones, coordinate with cemetery maintenance crews, and keep dust and noise controlled. It adds time to the job, but it’s the only respectful way to work in Colma. If your project is near a cemetery border, call (866) 925-0334 and we’ll factor that into the schedule.
Service Areas Near Colma
We run CGI cabinetry and quartz work throughout the northern Peninsula. Beyond Colma service area, we work in South San Francisco, San Bruno, Brisbane, and the neighborhoods around Visitacion Valley. If you’re in CGI service in Millbrae or CGI service in Visitacion Valley, same crew, same standard. Call (866) 925-0334 and we’ll confirm your street.
Book Your CGI Service in Colma Today
If your CGI cabinets are swelling, your quartz seams are showing, or you’re planning a kitchen that won’t fight the fog — whether that’s a CGI in Pacifica project or here in Colma — call (866) 925-0334. We’ll schedule a free estimate, walk the site, and give you a written quote. Build it right the first time, the Peninsula weather will find out if you didn’t.
Written by Noel Castañeda, Owner at Millwright Builders, serving Colma and the northern Peninsula.