Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Construction in Marin City, CA | Millwright Builders
We provide independent Mr-Glass shower enclosure service across Marin City, from full frameless installs to re-hangs, re-seals, and hardware replacement. The thing that separates our Mr-Glass work here from work over the hill is simple: in Marin City, a leaking enclosure is rarely just the glass. It’s usually the building around it. The Headlands runoff and fog-belt moisture that saturate this valley attack bathroom walls from the outside, so we diagnose the wall before we blame the enclosure. If your Mr-Glass door drags, leaks at the curb, or won’t close flush, call us at (866) 925-0334 for a free estimate.
Millwright Builders is an independent Mr-Glass service provider, not a manufacturer-authorized or warranty-endorsed shop. Our credibility comes from years of installing and repairing Mr-Glass frameless sliding doors, neo-angle enclosures, and semi-frameless pivot systems in Marin City’s mid-century housing stock. For more on our full scope, see Mr-Glass sales & service.
Why Marin City Residents Choose Us for Mr-Glass Service
Noel Castañeda grew up in Sunshine Gardens, where he learned early that good structures happen by decision, not accident. He brought that same mentality through his trades training at Skyline College and into Millwright Builders. When we work on a Mr-Glass enclosure in Marin City, we’re not just swapping hardware. We’re looking at the curb slope, the subfloor, the exterior drainage, and whether the wall itself is wicking moisture from the hillside behind it.
We re-hang, re-seal, and repair before we recommend replacement. If your Mr-Glass glass and frame are still serviceable, we’ll tell you that straight. If the curb is shot and the sill plate is soft, we’ll show you what’s happening underneath before we quote anything. That’s how we’ve built our reputation across Marin City service area homes that other contractors won’t touch.
Styles & brands we work with







Common Mr-Glass Construction Problems We Solve in Marin City
- Hinge-side and bottom sweep seal failure from fog-belt condensation. Marin City sits in a coastal fog belt under the Marin Headlands. Daily moisture attacks the hinge side and bottom sweep first. Water tracks under the curb, and in a 1950s home with original framing, that water rots the subfloor before you see anything on the tile. We replace the seals and then check what they were hiding.
- Uneven panel gaps from out-of-square tract framing. Older Marin City homes were rarely built plumb and square. Factory-cut Mr-Glass panels show uneven gaps at the curb, which lifts the bottom sweep and stresses the pivot hardware. We re-shim and re-hang the panel to sit square, then set the sweep so it actually seals.
- Corroded or seized roller and pivot hardware. The damp valley air is relentless on cheap original hardware. Rollers bind, doors drag, and eventually the panel drops out of alignment. We use genuine Mr-Glass replacement hardware when a matching kit is available, and stainless aftermarket hardware spec’d for coastal moisture when it isn’t.
- Standing water pooling against the gasket from a poorly sloped curb. If the curb was floated without proper slope, water sits against the glass gasket and wicks into the wall cavity instead of the drain. We re-float the curb, re-set the panel, and re-seal.
- Exterior wall moisture that mimics shower leaks. This is the Marin City-specific one. Flatland lots on the valley side sit directly under Headlands runoff. Bathroom walls wick moisture from outside before the shower glass ever leaks. We check exterior drainage and wall moisture before blaming the enclosure.
Mr-Glass Service in Marin City: What Local Conditions Mean for Your Equipment
Marin City is a historically working-class, largely mid-century community hemmed into a foggy coastal valley beneath the Marin Headlands, bounded by steep undeveloped hillsides and Highway 101. The housing stock is compact: 1940s wartime defense-worker homes, 1950s-70s tract and apartment buildings, plus the newer town-center cluster. Tight infill lots, hillside drainage issues, and aging framing dominate the construction reality here. It’s not the luxury new-build market of Mr-Glass in Sausalito or Mill Valley. It’s older homes being remodeled, repaired, and added onto, often on lots where water from the Headlands has to be managed before anything else gets built.
What that means for Mr-Glass owners is this: your shower enclosure is installed in a house that is actively dealing with moisture from multiple directions. The fog attacks the seals. The hillside runoff attacks the walls. The 1950s framing underneath holds onto whatever gets through. On one mid-century flatland home off Drake Avenue, a Mr-Glass frameless sliding enclosure had leaked at the curb for years. Pulling it revealed soft framing and a curb with no pre-slope. We corrected the curb, replaced the rotted sill plate and substrate, then re-set the Mr-Glass panels with fresh seals and stainless rollers. That shower has stayed dry through two winters since. Build it right the first time, or the Mr-Glass in Tiburon weather will find out if you didn’t.
Mr-Glass Models & Products We Service in Marin City
We service the full Mr-Glass enclosure range:
- Frameless sliding shower door systems
- Neo-angle frameless corner enclosures
- Semi-frameless pivot and bi-fold doors
- Custom glass panels with standard hinge and clip hardware kits
We stock the common sweep seals, roller kits, and hinge hardware for fast Marin City turnaround. When a matching Mr-Glass kit exists, we use it. When it doesn’t, we spec quality aftermarket stainless hardware that holds up to coastal moisture. We’ll never push a full replacement on you if a re-hang and re-seal will make your existing enclosure right.
See the difference
Before
After
Before
After
Before
AfterMr-Glass Service Pricing in Marin City
Here are the line-item price ranges for the work we do most in Marin City:
| Service | Price Range |
|---|---|
| Walk-In Shower Installation | $4,500 – $12,000 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Shower Replacement | $3,000 – $8,500 |
| Bathroom Vanity Installation | $800 – $3,000 |
| Roof Repair | $400 – $1,800 |
What drives the cost in Marin City specifically is what we find underneath. If the curb has no pre-slope, if the sill plate is soft, if the wall cavity is wet from the hillside, the scope grows. A free estimate includes a full check of the enclosure and the surrounding structure, so you know what you’re dealing with before you commit. Call (866) 925-0334 to schedule yours.
Serving Marin City, CA — Our Local Coverage Area
We’re based in the Marin City area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Mr-Glass Construction in Marin City
Usually the house isn’t plumb and square, so the factory-cut panel sits out of alignment and the bottom sweep lifts. We re-shim the panel, set the sweep flush, and replace any corroded rollers. Call (866) 925-0334 and we’ll diagnose it on site.
Yes. The fog attacks the seals, and the runoff from the Headlands saturates the valley-side walls. Water can enter the wall cavity from outside even if the enclosure is sealed tight. We inspect exterior drainage and wall moisture before we blame the glass.
Yes, most of the time. Small-footprint 1940s-60s bathrooms work well with a tub-to-shower conversion and a Mr-Glass frameless panel. We reuse the existing alcove, correct the curb slope, and install the glass to fit your exact opening. Call (866) 925-0334 for a free estimate on your specific bathroom.
Both can work. Full frameless enclosures have fewer seals to fail but depend on precise panel alignment. Semi-frameless doors are more forgiving of the out-of-square framing common in Marin City’s older homes, and the frame protects the bottom sweep from standing water. We’ll tell you which suits your specific bathroom after we look at it.
Depends on what’s leaking. If the seals and rollers are worn, new hardware and a re-seal often fixes it. If the curb has no pre-slope or the wall cavity is wet from outside, the enclosure isn’t the real problem. We’ll tell you honestly which it is. Estimates are free, so call (866) 925-0334 and we’ll look.
Service Areas Near Marin City
We provide Mr-Glass service across Marin City and the surrounding Peninsula. That includes Mr-Glass service in Woodside for hillside enclosures and custom glass, and Mr-Glass service in West Menlo Park for larger remodel scopes. We also cover South San Francisco, San Bruno, Brisbane, Colma, Millbrae, and Visitacion Valley.
Book Your Mr-Glass Service in Marin City Today
If your Mr-Glass enclosure is leaking, dragging, or showing gaps, the sooner we look, the less damage gets done. Call Noel Castañeda and the Millwright Builders crew at (866) 925-0334 to schedule your free estimate. We serve Marin City homeowners who want the job done right, and we’re ready to walk your bathroom with you.
Written by Noel Castañeda, Owner at Millwright Builders, serving Marin City residents across the fog-belt and hillside lots of ZIP 94965.