Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Jerith Construction in Mountain View, CA | Millwright Builders
We provide independent Jerith fence installation, Jerith repair in Los Altos, and gate service across Mountain View, from Old Mountain View bungalows to Monta Loma ranches. What sets our Jerith work here apart is that we plan around the city’s tree-protection rules and tight lot staging before the first post hole gets dug. Call (866) 925-0334 for a site visit and a written estimate.
Why Mountain View Residents Choose Us for Jerith Service
We’ve installed and repaired Jerith ornamental aluminum fencing on enough Mountain View properties to know how the product behaves on this side of the Peninsula, and we offer Los Altos Hills Jerith service as well. This isn’t a brand we picked up last season. Our crew understands Jerith’s powder-coated rail systems, picket profiles, and gate hardware well enough to tell you when a repair makes sense and when you’re better off replacing a run outright.
Noel Castañeda, our owner, came up through construction trades training at Skyline College and spent the better part of two decades doing residential and light commercial work across the Peninsula before founding Millwright Builders. His approach to Jerith service is simple: buy the right OEM parts the first time, set posts so they drain, and hang gates so they don’t fight the hinge. Build it right the first time – the Peninsula weather will find out if you didn’t.
Millwright Builders is an independent Jerith service provider. We are not manufacturer-affiliated or factory-authorized. What that means for you is straight talk: we recommend replacement when the numbers favor it, and we don’t push OEM parts where a quality aftermarket fastener does the job just as well. See our full Jerith sales & service capabilities.
Styles & brands we work with
Common Jerith Construction Problems We Solve in Mountain View
- Powder-coat chalking on south- and west-facing runs. Mountain View’s dry summers mean long stretches of intense UV exposure, and Jerith’s factory powder coat on a fully exposed south run can start to chalk and fade after enough seasons. We’ll tell you honestly if a re-coat is worth it or if replacement of the affected sections is the smarter money.
- Corrosion at post bases and cut ends. Winter rain in Mountain View is concentrated from December through March, and water that pools around a post base set in a low spot will eventually find its way under the coating. We see this most often on fences set near irrigated landscaping, where sprinkler overspray keeps the base wet year-round.
- Gate sag and hinge wear. Jerith walk gates with self-closing hinges are sensitive to post footing movement. Mountain View’s older downtown soils – especially the expansive clay pockets in the 94041 area – can shift enough to throw a gate out of plumb, and from there the hinge wears unevenly and the latch stops lining up.
- Loose pickets and rail vibration. Long, unsupported rail spans on narrow side yards are common on small downtown lots, where a fence run has to stretch between a bungalow wall and a property line with no room for intermediate posts. Picket-to-rail fasteners work loose over time, and the rail starts to chatter in the wind.
- Post footing drainage failures. When a Jerith aluminum post is set in a footing that holds water, the result looks like rust and feels like a leaning fence. On flat Mountain View lots with heavy clay soil, water doesn’t always drain away from the post base on its own – we correct the grade and reset the post so it stays dry.
Jerith Service in Mountain View: What Local Conditions Mean for Your Equipment
Here’s the thing about Mountain View that doesn’t apply the same way in Sunnyvale or Palo Alto: on Old Mountain View and Rex Manor bungalow lots, mature street trees protected under city tree ordinances often overhang the exact property line where a Jerith fence has to run. That changes how we work before a single hole gets dug. We adjust post spacing so footings stay clear of protected root zones, stage equipment on the driveway instead of the street when a single-lane residential road won’t take a dumpster, and confirm tree-protection compliance as part of the planning pass. A generic fence crew that runs the string line and starts digging is asking for a stop-work order. We don’t work that way. We also serve the wider Mountain View service area from a single point of accountability.
Jerith Models & Products We Service in Mountain View
We service the full Jerith residential lineup you’ll find on Mountain View properties. That includes the Jerith Traditional Style aluminum fence in 3-rail, 4-ft and 5-ft residential grades, the Jerith Designer Series with decorative pickets and scrollwork, and the Jerith Industrial/Commercial grade aluminum fence used on higher-security and institutional properties around town.
For repairs, we source genuine Jerith replacement components – rails, pickets, post caps, hinges, and latches – so the fit and finish match what’s already on the fence. Where OEM hardware isn’t critical, we use quality aftermarket fasteners and concrete mix. Our parts approach is built around getting your Mountain View fence back to service quickly, not waiting on a specialty order when a local supplier has what’s needed.
See the difference
Before
After
Before
After
Before
AfterJerith Service Pricing in Mountain View
Jerith fence work in Mountain View is priced by the linear foot of fence, the height and style you choose, and how much prep the lot requires. Tight downtown access, protected tree root zones, and neighbor-notification requirements all add planning time, and that shows up in the estimate rather than as a surprise later.
| Service | Typical Price Range (Mountain View) |
|---|---|
| Aluminum Fence Installation | $4,000 – $10,000 |
| Vinyl Fence Installation | $3,500 – $9,000 |
Every estimate is a written line-item quote. You’ll see the cost of posts, panels, hardware, concrete, and labor separated out. We don’t do vague lump sums, and we don’t change the number once work starts unless you change the scope. Call (866) 925-0334 to schedule your free estimate.
Serving Mountain View, CA — Our Local Coverage Area
We’re based in the Mountain View area and know this community well, and we also work as a General Contractor – Mountain View. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Jerith Construction in Mountain View
Yes. We do it regularly on 1920s-era bungalow lots in the 94041 area, where the side yard between the house and property line can be under four feet. The key is hand digging for post holes in tight corridors, setting posts close to the foundation without disturbing it, and adjusting rail spans so the fence doesn’t vibrate. Call (866) 925-0334 and we’ll walk the lot with you before quoting.
Winter rain from December through March is the biggest threat to post footings here, especially on flat lots with clay-heavy soil where water doesn’t drain quickly. We set Jerith posts on a gravel base and slope the concrete crown away from the post so water sheds instead of pooling. That’s the difference between a fence that stands for twenty years and one that leans after five.
It depends on how much of the run is affected. If chalking is limited to a section or two, we can replace those rails and pickets with OEM Jerith parts and get the fence looking consistent again. If more than 30% of the run has coating failure, we’ll tell you replacement is the better value – patching it piecemeal will just mean chasing the problem down the fence line for years.
It often does, especially in Old Mountain View and Rex Manor where the city’s permitting and neighbor-notification rules are among the most scrutinized in the region. On a 1920s bungalow lot we replaced a leaning 4-ft Jerith Traditional fence where a protected street tree canopy overhung the property line. We adjusted post spacing to clear the root zone, and the project passed neighbor-notification review without needing a variance. We handle that paperwork as part of the job. For questions about your specific property, call (866) 925-0334.
We recommend Jerith’s OEM self-closing hinges and latches with a powder-coat finish that matches the fence. The weak point isn’t usually the hardware itself – it’s the post footing it’s mounted to. If the footing shifts, even the best hinge will bind and wear. We set gate posts deeper than line posts and use a wider footing so the gate stays plumb through wet winters and dry summers.
Service Areas Near Mountain View
We run Jerith fence service throughout the Peninsula and northern San Mateo County. That includes Jerith service in Sunnyvale, Jerith service in Loyola, plus South San Francisco, San Bruno, Millbrae, and the Visitacion Valley area. If you’re within a short drive of Mountain View, we can schedule a site visit around your availability.
Book Your Jerith Service in Mountain View Today
If your Jerith fence needs repair, gate adjustment, or full replacement as part of a larger Home Remodeling – Mountain View project, call (866) 925-0334 to schedule a free estimate. We’ll walk the property with you, talk through what’s actually going on, and give you a written quote before any work starts.
Written by Noel Castañeda, Owner at Millwright Builders, serving Mountain View and the Peninsula since founding the company.