Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Construction in Felton, CA | Millwright Builders
Mr-Glass service in Felton means two things at once: fixing sagging shower doors and replacing clouded panels, yes, but also doing it on steep wooded lots that Cal Fire classifies as Very High Fire Hazard Severity Zones. We’re Millwright Builders, an independent contractor serving Felton and the San Lorenzo Valley, and we install, repair, and replace Mr-Glass shower enclosures, glass railings, and mirrors with OEM-grade parts that hold up to wet winters and dry summers. We’re not authorized or sponsored by Mr-Glass, but we know their hardware well enough to tell you when a re-hang beats a replacement. Call (866) 925-0334 for a free estimate.
Why Felton Residents Choose Us for Mr-Glass Service
Noel Castañeda, our owner, did his construction trades training at Skyline College in San Bruno and spent nearly two decades on residential and light commercial work across the Peninsula before founding Millwright Builders. He grew up in the Sunshine Gardens neighborhood of South San Francisco, where the industrial corridor taught him early that good structures don’t happen by accident. That’s the standard we bring to every Mr-Glass enclosure we touch in Felton. We’ve seen how their frameless hinges age in this specific climate, and we stock the seals, rollers, and stainless pivots that actually hold up here. We’re a General Contractor in Felton, so when a shower door repair uncovers rotted wall framing or a curb that was never flashed properly, we fix that too, under one contract. Your renovation shouldn’t require you to become a project manager.
We specify the brand, explain the trade-off, and stand behind the install. For Felton homeowners, that matters because the list of contractors willing to drive up a narrow mountain road for a glass repair is short. We schedule deliveries around whatever the road and turnaround allow, not the other way around.
Styles & brands we work with
Common Mr-Glass Construction Problems We Solve in Felton
- Frameless hinge-point sag and seal failure. Felton’s wet winters and dry summers cycle the door hardware hard. A 3/8″ Mr-Glass door drops, the bottom sweep stops sealing, and water ends up on the bathroom floor. We re-hang with OEM hinges and replace the sweep before the curb rots.
- Hard-water and redwood-debris staining on glass. Mineral spotting from well water plus tannin and sap film from overhanging redwoods etches both low-iron and standard tempered panels. We deep-clean, re-seal, and only then recommend replacement if the etching has gone too far.
- Wall jambs pulling out of older redwood-era cabin walls. Those old cabins in Felton are charming, but the framing is often out of plumb. Improperly shimmed jambs pull loose, and leaks start at the curb and wall channel. We re-anchor and re-shim, then re-seal.
- Cheap aftermarket rollers and pivot pins failing early. Bypass Mr-Glass systems with bargain-bin nylon rollers don’t last one humid mountain season. We use OEM-grade nylon rollers and stainless pivots that actually survive a Felton bathroom.
- Glass panel and enclosure access on steep lots. Narrow winding driveways off Felton-Empire Road often can’t fit a standard material truck. We plan panel sizes, delivery vehicles, and carry-in routes around what your driveway and turnaround allow.
Mr-Glass Service in Felton: What Local Conditions Mean for Your Equipment
Because so much of Felton sits in or near Cal Fire Very High Fire Hazard Severity Zones, Home Remodeling – Felton projects often trigger ignition-resistant and Chapter 7A-compliant detailing that a comparable Scotts Valley or Santa Cruz lot wouldn’t require. That changes how we flash, vent, and finish around new glass and tile. When we install a Mr-Glass shower enclosure in Felton, we’re thinking about ember-resistant vent screening, sealants that meet fire code, and wall assemblies that won’t let embers find a gap behind the tile. It also means we coordinate with local inspectors earlier, because the fire marshal’s sign-off and the building permit are both part of the job. Build it right the first time, the Peninsula weather will find out if you didn’t.
On a wooded lot off Felton-Empire Road, our crew re-hung a sagging 3/8″ frameless Mr-Glass hinged enclosure in an older cabin bathroom. The original install had pulled out of out-of-plumb redwood framing. We replaced the wall jamb anchors, hinges, and bottom sweep, re-shimmed and re-sealed the curb, and confirmed the door swing and seal. The homeowners got a tight, leak-free enclosure instead of a full tear-out.
Mr-Glass Models & Products We Service in Felton
We service the full range of Mr-Glass lines you’ll find in Felton homes: frameless hinged shower door enclosures in 3/8″ and 1/2″ tempered, sliding and bypass tub-shower glass systems, semi-frameless pivot shower doors, and glass railing and mirror products specified in local remodels. For parts, our rule is simple. We use OEM Mr-Glass hinges, pivots, seals, and rollers wherever they’re still available, and only spec quality aftermarket stainless or nylon hardware when OEM has been discontinued. Never the bargain-bin hardware that fails in a season. We stock the common seals and rollers that Felton bathrooms eat through so most repairs don’t wait on a two-week parts order. When a panel has been etched by redwood tannin or cracked from a hard impact, we’ll tell you straight whether a re-hang buys years or whether full enclosure replacement is the smarter spend.
See the difference
Before
After
Before
After
Before
AfterMr-Glass Service Pricing in Felton
Here’s what Mr-Glass work typically costs in Felton. These are working ranges based on our San Lorenzo Valley market, and your exact number depends on panel size, hardware condition, and whether we’re dealing with out-of-plumb framing or fire-code detailing.
| Service | Typical Felton Price Range |
|---|---|
| Frameless Glass Shower Enclosure Installation | $4,500 – $12,000 |
| Walk-In Shower Installation | $4,500 – $12,000 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Shower Replacement | $3,000 – $8,500 |
| Bathroom Remodel | $9,000 – $28,000 |
What drives the price in Felton specifically is access and framing condition. A steep driveway that can’t take a full material truck adds handling time. A 1960s cabin wall that’s out of plumb adds re-shimming work. A free estimate with us means we walk the site, check the existing hardware, and write a line-item quote, not a guess. Call (866) 925-0334 to schedule yours.
Serving Felton, CA — Our Local Coverage Area
We also provide Mr-Glass service in Ben Lomond, and we’re based in the Felton area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Mr-Glass Construction in Felton
Yes, often they do. Much of Felton sits in or near Cal Fire Very High Fire Hazard Severity Zones, so any remodel that touches exterior walls, vents, or openings can trigger Chapter 7A ignition-resistant requirements. For glass work, that usually means ember-resistant vent screening, specific sealants, and proper flashing around new enclosures near exterior walls. We coordinate that with the building department and fire marshal so your remodel passes inspection the first time. Call (866) 925-0334 for a free estimate that includes fire-code checking.
Almost always it’s the hinges and wall anchors working loose from out-of-plumb framing or wet-dry cycling. Felton’s winter moisture swells the wood, summer dries it out, and the door drops a little each cycle until the bottom sweep no longer seals. Re-hanging with OEM hinges and properly shimmed anchors fixes it. Call (866) 925-0334 and we’ll tell you if a re-hang will buy years or if the panel needs replacement.
Usually yes, but it takes planning. Many Felton driveways off winding mountain roads can’t fit a standard material truck or a full-size panel carrier. We schedule smaller delivery vehicles, coordinate panel dimensions with access, and carry in by hand where needed. We’ve done enough installs off Felton-Empire Road, and provide Mr-Glass service in Lompico, to know which approach works. Call (866) 925-0334 and we’ll figure out the access plan before we quote.
We use OEM Mr-Glass hinges, pivots, seals, and rollers wherever they’re still available. When OEM has been discontinued, we spec quality aftermarket stainless or nylon hardware, never the cheap stuff that fails in one season. We’ll show you exactly what we’re installing and why. Call (866) 925-0334 for a parts-specific quote.
That depends on panel condition, hardware age, and framing. If the glass isn’t etched or cracked, a re-hang with new OEM hinges and seals often buys five or more years for a fraction of replacement cost. If the panel is clouded from redwood tannin or cracked, replacement is the smarter spend. We’ll give you an honest read either way. Call (866) 925-0334 and we’ll come look.
Service Areas Near Felton
We serve Felton and the surrounding San Lorenzo Valley, including Mount Hermon and Scotts Valley, plus the broader Peninsula. If you’re in Mr-Glass service in Mount Hermon territory or need Mr-Glass service in Scotts Valley, we cover those roads too. You can also see our full Felton service area page or learn more about our Mr-Glass sales & service approach.
Book Your Mr-Glass Service in Felton Today
If your Mr-Glass enclosure is sagging, leaking, or just looking rough, we can take a look. Call (866) 925-0334 to schedule a free estimate in Felton, and we’ll bring the parts that actually last here.
Written by Noel Castañeda, Owner at Millwright Builders, serving Felton and the San Lorenzo Valley.