Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Toto Construction in San Martin, CA | Millwright Builders
If you own a Toto toilet or Washlet in San Martin, we service it, and we handle the bathroom work around it. We’re Millwright Builders, a licensed general contractor out of South San Francisco, and we run an independent Toto repair and installation practice that covers the 95046 zip code. One call reaches the same crew that can diagnose a hard-water-scaled fill valve and then pull the permit for the bathroom remodel that Toto fixture sits in. Call (866) 925-0334 to schedule a free estimate.
Why San Martin Residents Choose Us for Toto Service
We’ve rebuilt and installed more Toto fixtures than we can count as part of our Toto services, from two-piece Drake toilets to full Washlet+ suites, and that means we know their internals cold. The fill valves, flush towers, tank-to-bowl gaskets, and wax-ring quirks aren’t a study guide for us. They’re what we work on every week. We’re an independent contractor, not a Toto authorized dealer, so when we tell you a part should be genuine OEM, it’s because we’ve seen aftermarket parts fail and come back to haunt the homeowner, not because a distribution agreement says so.
San Martin isn’t a big town, and the homes out here aren’t like what you’ll find over the hill toward Morgan Hill Toto service areas. Private wells, septic systems, ranch houses on acreage, and county permitting. When we work on a Toto fixture here, we’re thinking about the whole system that feeds it. Noel Castañeda, our owner, cut his teeth doing residential and light commercial work across the Peninsula, and he built Millwright around one idea: specify the brand, explain the trade-off, and stand behind the install. That applies whether we’re swapping a flush valve or gutting a primary bath.
We keep the common Toto wear items on hand, so we’re not making a homeowner wait four days for a fill valve when the toilet’s running all night. More on that below.
Styles & brands we work with
Common Toto Construction Problems We Solve in San Martin
Here’s what actually fails on Toto fixtures in this valley, and what we do about it:
- G-Max and 1.28 GPF fill and flush valves (TSU99A.X, THU series) wearing out. San Martin’s well water is hard, and mineral scale builds up on the flush tower and rim jets until you get phantom running or a weak flush. We pull the valve, clean or replace with genuine Toto OEM, and the toilet runs like new.
- Wax ring and closet flange failures on older Drake installs. Ranches and older homes here sit on slabs that shift with wet winters and dry summers. When the flange cracks or the ring gives out, you get slow seepage and odor around the base. We re-set the flange if needed and install a new ring, not a second wax layer stacked on a failing one.
- Washlet seat electronics and supply-screen clogging. Homes fed by private wells push sediment and iron through the inlet filter. The spray pressure drops, or the unit throws a code. We clean or replace the filter, check the solenoid, and confirm the seat’s flow sensor is reading correctly.
- Tank-to-bowl gaskets and bolts corroding. High-mineral water eats at the hardware over time, and San Martin’s temperature swings don’t help. A small leak at the tank junction becomes a steady drip. We replace gaskets and hardware as a set, OEM every time.
- Condensation sweating off uninsulated tanks. Hot, dry summer days followed by cool nights will make a tank drip, especially in uninsulated bathrooms or outbuildings. We can line the tank internally, adjust the fill pattern, or spec a fixture better suited to the room’s conditions.
Toto Service in San Martin: What Local Conditions Mean for Your Equipment
The thing most people don’t realize about San Martin is that because it’s unincorporated Santa Clara County, a bathroom remodel that swaps or relocates a Toto toilet can trigger a County septic-capacity check and a well-yield review. That doesn’t happen a few miles away in Morgan Hill or Gilroy Toto service areas, where city sewer and municipal water handle the same job. Out here, the County wants to know that the septic system can absorb the additional fixture load and that the well produces enough gallons per minute to serve the project. It’s not a formality. It shapes the answer to every question: which toilet, where it goes, whether a tub drains into the same line as a new walk-in shower. Millwright Builders plans Toto fixture selection and placement around those constraints, not just the tile layout. That’s the difference between a contractor who’s worked in San Martin and one who’s just passing through.
On a ranch property off the Llagas Valley agricultural corridor near San Martin, we replaced a failing Toto Drake fill valve and wax ring where hard well water had scaled the flush tower and the old flange had shifted on the slab. We rebuilt it with a genuine Toto TSU99A.X fill valve and a new tank-to-bowl gasket, re-set the flange, and the phantom running and weak flush were gone. Same visit, we swapped the Washlet inlet filter, which had been clogged with well sediment. Three problems, one visit, because we know what this water does to Toto equipment.
Toto Models & Products We Service in San Martin
We service the Toto fixtures most common across San Martin’s ranches, farmhouses, and newer custom homes: the Drake (CST743/CST776 two-piece and MS776124CEFG one-piece), the Eco UltraMax and UltraMax II one-piece toilets, Vespin II and Aquia high-efficiency models, and the full Washlet and Washlet+ line (S550e, C5, SW series bidet seats). For parts, we use genuine Toto OEM fill valves, flush towers, gaskets, and Washlet filters. Tolerances are tight, and aftermarket parts are the number one cause of repeat leaks we see. Toto toilets are built to be rebuilt. A full valve and seal kit is almost always the smarter call than replacing the fixture, unless the bowl or trapway is cracked. We stock the most common OEM parts locally so San Martin turnaround is measured in days, not weeks.
See the difference
Before
After
Before
After
Before
AfterToto Service Pricing in San Martin
Toto service pricing depends on which fixture, which part, and whether the surrounding bathroom work triggers a permit or a County review. We never quote a number until we’ve seen the job, and every estimate starts free. Below are common bathroom project ranges we quote in San Martin, measured against the work this valley’s homes actually need:
| Service | Typical Range |
|---|---|
| Bathroom Remodel | $9,000 – $28,000 |
| Small Bathroom Remodel | $5,000 – $12,000 |
| Walk-In Shower Installation | $4,500 – $12,000 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Bathroom Vanity Installation | $800 – $3,000 |
What drives the cost on a Toto bathroom project here isn’t just the fixture. It’s whether the plumbing moves, whether the septic capacity supports it, and whether the well flow rate passes a County review. We’ll walk you through what’s driving the number and what you can adjust. Call (866) 925-0334 and we’ll put a written line-item estimate together for you, free.
Serving San Martin, CA — Our Local Coverage Area
We’re based in our San Martin service area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Toto Construction in San Martin
A hairline crack in a Toto tank or bowl cannot be reliably repaired. The porcelain is under constant water pressure and thermal stress, and a patch will fail, usually at the worst possible time. If the crack is in the tank, a genuine Toto OEM replacement tank can sometimes be ordered for two-piece models like the Drake. If the bowl or trapway is cracked, you’re replacing the fixture. We’ll tell you straight which side of that line your toilet is on. Call (866) 925-0334 and we’ll take a look.
No. We’re an independent contractor with deep hands-on experience installing and servicing Toto fixtures. We are not authorized, sponsored, or endorsed by Toto. That independence means our recommendation to use genuine Toto OEM parts isn’t affected by a distribution arrangement. It’s because those parts fit, last, and keep the warranty conversation simple.
Most Toto repairs, like a fill valve swap, wax ring replacement, or Washlet filter cleanout, wrap up in a single visit once we’re on site. For larger bathroom work that involves moving or replacing a Toto fixture and triggers a County permit, plan for the permit review to add time to the schedule. We’ll lay out a realistic timeline before any work starts.
We service the Drake two-piece (CST743/CST776), the Drake one-piece (MS776124CEFG), Eco UltraMax and UltraMax II one-piece models, Vespin II and Aquia high-efficiency toilets, and the full Washlet and Washlet+ line, including S550e, C5, and SW series bidet seats. If you’re not sure which model you have, call us and describe it; we’ll figure it out.
A straightforward Toto fill valve replacement or wax ring job typically stays under a few hundred dollars including the OEM part. If the flange is cracked or the tank-to-bowl gasket has corroded, the cost rises. A full bathroom remodel that includes a new Toto fixture falls into the ranges in the table above. For a hard number, call (866) 925-0334 for a free estimate. We’ll tell you what’s worth fixing and what isn’t.
Service Areas Near San Martin
Our Toto service area runs north out of San Martin through the South Bay and up the Peninsula. We regularly work on Toto fixtures in Toto service in Amesti and Toto service in Freedom to the south, and across South San Francisco, San Bruno, Brisbane, Colma, and the Visitacion Valley neighborhoods to the north. If you’re anywhere in the 95046 area or along our route, call us.
Book Your Toto Service in San Martin Today
You need a Toto fixture that runs quietly, flushes fully, and doesn’t leak around the base. We’ll get it there, and we’ll plan the bathroom around it so the County has nothing to flag. Call (866) 925-0334 to schedule your free estimate. Build it right the first time – the Peninsula weather will find out if you didn’t.
Written by Noel Castañeda, Owner at Millwright Builders, serving San Martin and the Peninsula.